Javed The Heart Hacker

Can't format Pen drive then come here

javed — Mon, 25 Jun 2012 14:50:58 GMT

1) Right click on My computer > Open Manage.
2) Select Disk management.
3) Right click on disk label (like J: etc..)

4) Change Drive letter and paths.....
5) Click on Remove.
6) Then format pen drive.. .
7) After that again Add Drive letter (J:)
Now your pen drive is safe formatted..

Changing your home network IP address

javed — Mon, 25 Jun 2012 04:19:51 GMT

Microsoft Windows users

To change or specify the IP address of your computer for your own local area network (LAN), follow the below steps. Keep in mind that if you're connecting to the Internet with a broadband connection, adjusting your network settings may cause issues with your broadband connection. Finally, if your home network is setup through a network router, that router could be assigning your computer dynamic IP addresses, and specifying a static IP address may cause issues.

Get to the Microsoft Windows desktop.
Right-click on My Network Places or Network Neighborhood and click Properties.
Right-click on Local Area Connection and click Properties.
Click Internet Protocol (TCP/IP) and click Properties. If this is not present, you'll need to install this protocol.
In the Internet Protocol (TCP/IP) Properties window, select "Use the following IP address" if not already selected and specify the new IP address you wish to use. While entering this data, you'll also need to specify the subnet mask and default gateway.

Linux users

The below information is for how to specify and adjust your network settings through the command prompt. Changing your network settings will require root access.

Get to the command prompt.
Move to the /etc/sysconfig/network directory.
Edit the interfaces file and adjust your network settings in this file.

free sms on docomo

javed — Sun, 24 Jun 2012 05:45:41 GMT

sms "join" to 121 and wait for confirmation

sms "quit" to 121 and wait for confirmation

now u have 50 local/national sms valid for 1 week

use 3g in 2g plan with docomo another trick

javed — Sun, 24 Jun 2012 05:38:13 GMT

1} first activate 2g gprs planon 3g sim

2} then make ur balance nearly 1rs

3}type *141# then choose the cheapest plan

4} they will say [ u dont have sufficient balance]

5} just ignore it , open ur browser nd check the speed

dont forget subscribe me on facebook

https://www.facebook.com/javedthehearthacker.786

use 3g speed in 2g connection with tata docomo

javed — Sun, 24 Jun 2012 05:31:37 GMT

now u can use 3g speed in 2g connection with tata docomo

1) activare 48 rs gprs pack

2) send sms {3GLIFE to 53333} or {ACT3G to 53333}

3} tata docomo will reply very late may be after 2 days after
2 days u will feel ur speed increasing

NOTE by javed:- u can get only 125kbps cause its free 3g

NOTE by javed :- send the sms only by a 3g phone
otherwise u wont get the settings

Speed Up PC Performance with 4 expert tips

javed — Sun, 24 Jun 2012 05:06:13 GMT

Want more PC speed? Learn How to Speed Up PC Performance with 4 expert tips!

One of the biggest questions on the net is " How to speed up PC performance? ". Well we have compiled the best tips and tricks for a phenomenal boost in PC speed. If you follow these the for ways of how to increase PC speed, you should see a boost of anywhere between 35-52.5% in performance speed based on industry standards.

TOP 4 Ways to Speed Up PC Performance

1. Use a Registry Cleaner.

This will free up resources show you how to increase PC speed with a few clicks. This is one of the best answers to "how to speed up PC performance?". These easy point and click programs also defrag your hard drive and remove spyware. All that with the push of a button weekly will keep your computer running at it’s original PC speed specs. There are dozens of different registry cleaners software and registry cleaner tools available for use with the registry, However only about 5 have really proven themselves based on user support. One of the industry leaders is PC Health Advisor. It was one of last year's Most Popular PC Repair products. PC Health Advisor is one of the easiest and best. It’s easy to get scammed with inferior products so it’s best to choose a registry cleaner with an excellent record.For an in depth comparison of the best registry cleaner on the market, click this link.

2. Defrag your hard drive

Over time, the data on your hard drive gets scattered. De-fragmenting your hard drive puts your data back into sequential order, making it easier for Windows to access it. As a result, the performance of your computer will improve. An excellent registry cleaner will allow show you how to speed up your PC using defrag techniques. For Easy Steps to Defrag your PC Click Here!. Remember that the hard drive is the cornerstone of your system. If it is in trouble your system can collapse.
Tips to Speed Up Your Hard Drive Click Here! If you are interested in speed up your computer on the net. Click the image below. If not read on.

3. Scan for Adware/Spyware and Viruses

These nasty little worms can wreak havoc on your PC speed. Detecting and cleaning viruses is an excellent way to improve your system's performance and increase PC speed. Registry cleaners will help to remove these buggers also!To Learn more a about the best Spyware removal programs on the maket, Click this link

4. Adjust your computer’s Visual effects

Windows provides a number of resource hogging and interesting visual effects like animated windows and fading menus. These effects, however, can slow down your computer and kill your PC speed. By Altering your preferences and performance needs you can learn how to increase PC Speed in seconds. This is one of Microsoft's tips on how to increase PC speed and performance.Visit Adjust Visual Performance page for assistance.

A excellent registry cleaner can perform all but number 4. If you are serious about learning how to speed up PC performance. Get a registry cleaner and let it do most of the work. There are lot of registry cleaner choices on the market. Learn how to increase PC speed organically and don't get scammed into spending thousands for a new PC.

Bonus Tips

Use a Window's Optimization Tool

Using a Windows Optimization tool can give you a big boost in the the performance department. This takes the work out of your regular maintenance of organizing files, defragging your hard drive and other optimization task. For Windows Optimization Tools, Click Here!

Manage Your Startups

By managing your Windows startup programs and services you can free of vital CPU resources that can re-allocated your PC performance. This is a quick and easy tweak learn how to speed up PC CPU access time.Click Here to Learn how to speed up PC performance by managing your Startups.

Clean Windows Temp Files

Your Windows Temp files can swell to enormous sizes. This will eat up free space that could be allocated for applications you would like to use. Learn how to clean up your PC of useless files

increase ur virtual memory

javed — Sun, 24 Jun 2012 04:58:35 GMT

What is Virtual Memory?

Virtual memory is simulated RAM. When you have used up all your RAM, your computer will shift data to an empty space on the hard drive. The computer swaps data to the hard disk and back to your RAM as needed. When you increase your virtual memory you are increasing the empty space that is reserved for your RAM overflow.

Also having enough available space is absolutely necessary for your virtual memory and RAM to function properly. You can increase Virtual Memory performance automatically by freeing up resources in your registry. You may want to use a Registry Cleaner. Click Here to learn more!

How to increase Virtual Memory?

In Windows XP

1.Click Start, and then click Control Panel.
2.Click Performance and Maintenance, and then click System.
3.On the Advanced tab, under Performance, click Settings.
4.On the Advanced tab, under Virtual memory, click Change.
5.Under Drive [Volume Label], click the drive that contains the paging file that you want to change.
6.Under Paging file size for selected drive, click to Custom size check box. You can enter the amount of memory you would like to reserve for Virtual memory by entering the initial and maximum size.
7.Click Set
When you are prompted to restart the computer, click Yes.
Special Note: You should choose the same amount for the initial size and maximum size. This will Stop your CPU from constantly changing the paging file.

HOT TIP: To stop your CPU from constantly changing the paging file, set the initial and maximum size to the same value. For example, 500 and 500. The value should be at least 1.5 times more than your physical RAM. If your computer has 512MB of RAM increase the virtual memory paging file to 1.5*512= 768

In Vista/Win 7

1. Click Start button Picture of the Start button
2. Click Control Panel
3. Choose System and Maintenance and then click System.
4. In the left pane, click Advanced system settings.
5.On the Advanced tab, under Performance, click Settings.
6. Click the Advanced tab, and then, under Virtual memory, chooseChange.
7. Click Custom to change the Initial size (MB) and Maximum size. See the hot tip above.

Remember to choose the drive you would like to use to increase the virtual memory. In most cases it usually your C: Drive. You can set the initial size and maximum size after clicking the Custom size check box.Remember its better to keep the Virtual memory values the same.

Also having enough available space is absolutely necessary for your virtual memory and RAM to function properly.

TO IMPROVE BROWSING SPEED

javed — Sat, 23 Jun 2012 17:35:35 GMT

You need a internet speed booster right! I suggest an optimizing software named TCP/IP OPTIMIZER.
many people suggest internet cyclon but in my opinion TCP/IP OPTIMIZER is the best.
In TCP/IP OPTIMIZER u can see a sliding bar that indicates connection speed.
move this to level 112 kbps. then select optimal settings , then press APPLY CHANGES. restart ur pc.
in my experience this settings boost the speed up to 200%.

TCP/IP OPTIMIZER FREE DOWNLOAD

Also use firefox or opera 10 for browsing internet. This can optimize internet speed rather than your old internet explorer.

STILL YOU EXPERIENCE BAD SPEED.... DONT WORRY
Use another useful software named CONNECTION KEEPER.Connection Keeper is an invaluable time-saving tool for dial-up users. This free program simulates Internet browsing (at a random interval) to prevent the connection from appearing idle, thus preventing your ISP from dropping the connection due to inactivity. note that connection keeper is not an internet accelerator software so use it only if you had a problem of connection dropping.
In CONNECTION KEEPER , set query interval to 0.10 sec.(best because our aircel is vvv slw)
run this program in background. remember to put ON keep the connection alive option.

CONNECTION KEEPER FREE DOWNLOAD

How to Remove Google Text Ads

javed — Sat, 23 Jun 2012 12:20:52 GMT

Updated 4. June 2012 - 20:39 by gizmo.richards

It seems that almost every web page you view these days has Google
AdSense texts ads spread across the top or down the side.

These ads have never bothered me. They are easy enough to ignore and
besides, website owners are entitled to earn a living just like the rest of us.

However, lately some sites have started embedding the Google ads in the
center of the page or worse still, right in the middle of a block of text. So
I decided enough was enough and started looking for ways to block the ads.

It turns out that it's dead easy to stop them. In fact there are many ways
you can do it. For example Firefox users can use the AdBlock or Customize
Google extensions to kill the ads while Internet Explorer users can use one
of the many ad-blocker add-ins such as AddSubtract, WebWasher or the
excellent freeware program IE7Pro.

Perhaps the simplest and most universally applicable method is to use the
Windows Hosts file to block the address of the Google ad-server.

There is another advantage in using this technique; it will help you develop
an understanding of the Hosts file and its many uses.

The Windows Hosts file

This a file on your computer that can be used to locally translate the names
of web sites into IPs. IPs are sets of four numbers separated by dots like
65.109.128.16. They are the real addresses of the internet not web site
names (URLS). Names are only a convenience and have to be translated
into IPs. For example, the name (URL) of my website is techsupportalert.
com but its IP, its "real" address on the internet, is actually 72.52.134.218.

Normally this kind of translation takes place at your ISP. They have a special
server dedicated to the task called a DNS server. Whenever you type a URL
like www.techsupportalert.com into your browser address window, the DNS
server translates the name into the corresponding IP 72.52.134.218. It's
automatic and requires no involvement from you.

However, you can also do it locally on your own PC and that's where the
Windows Hosts file comes into play.

The Hosts file is just a plain text file containing a simple list of web site
names (URLs) and their corresponding IPs. Here's an example of what a
Hosts file might look like:

216.109.118.69 www.yahoo.com
72.52.134.218 www.techsupportalert.com
216.239.115.141 www.cnet.com

You can think of this like an address book. In an address book you look
up a name and find the address. With the Hosts file you look up a web
site name (URL) and find the address (IP). In the example above, any
reference to the namewww.yahoo.com will directed to the address
216.109.118.69.

Now, the Hosts file on most computers has nothing in it. That's fine
because the DNS translation is usually handled by your ISP.

If your Hosts file does have entries then these are used for the DNS
translation for those sites instead of your ISPs DNS server. This is
actually fractionally quicker as it saves a step. In fact. some web
accelerators store thousands of popular sites in your Hosts file to take
advantage of this slight increase in speed.

But there's another common usage for the Hosts file: to block addresses
. This is done by using a dummy address, typically 127.0.0.1, that goes
nowhere. For example, consider this entry:

127.0.0.1 wwww.yahoo.com

With this entry in the hosts file, any reference to www.yahoo.com will be
redirected to the address 127.0.0.1. Now that address is not a valid web
address for any real web site. In fact, by convention it refers to your own
computer.

If you have this entry in your Hosts file and you type www.yahoo.com into
your browser, you'll get an error message: "Host cannot be found."

This is the very technique that we can use to block Google text ads.

Stopping Google Ads with the Hosts File

All the Google text ads seem to come from the addresses
pagead.googlesyndication.com or pagead2.googlesyndication.com.
If we place these names in the Windows Hosts file and point them to
a dummy address then the Google ads will not appear.

First though, we need to locate the hosts file. Here is the usual location
for the major Windows versions:

Windows 9x, ME C:\WINDOWS
Windows NT (and some 2K) C:\WINNT\system32\drivers\etc
Windows 2K, XP, 2003, Vista C:\WINDOWS\system32\drivers\etc

The Hosts file is simply called "HOSTS" and has no file extension.

It's a simple text file and must only be changed with a plain text editor
like Notepad and never a word processing program such as MS Word.

First, we need to open the Hosts file in Notepad. If you don't know how
to do that then locate the Hosts file in Windows Explorer and right-click
on it. Select "Open" and then check "Select the program from a list." You'll
then be presented with list of programs; select
Notepad. You should now see a simple text file.

Go to the first blank line at the bottom of the file and type in ( or copy
and paste) these two lines:

127.0.0.1 pagead.googlesyndication.com
127.0.0.1 pagead2.googlesyndication.com

Make sure you leave no blank lines before this entry.

Just save the file and you are finished. Saving this change may spark an
alert from your anti-spyware software but it's OK, just approve the change.

If you've followed the instructions carefully you should never see Google
AdSense text ads again. If at a future stage you want to see the ads again,
just use Notepad to delete the line you just added.

The same technique can be used to block other advertising servers, malicious
spyware or sites containing inappropriate material. In fact a number of folks
offer free downloads of Hosts files containing thousand of entries of such
unwanted sites.

I'm not a great fan of using the Hosts file for such large scale blocking. To
me it's too unselective - I prefer to know exactly what I am blocking and
this is virtually impossible with a list containing thousands of sites. However
if you want to play with this kind of application, here are some Host file
download sites:

http://www.hosts-file.net/
http://www.mvps.org/winhelp2002/hosts.htm

Dedicated Host file enthusiasts may want to check out Hostess, a free
Hosts file editor/manager you can get from
here:http://www.raymarron.com/hostess/

lock your CD/DVD Disc Data

javed — Sat, 23 Jun 2012 05:04:11 GMT

How many times you have felt to lock your CD/DVD Disc Data to prevent from other reading your disc or copying disc content? I am sure it will quite few times. None of the popular cd-dvd burning software provides any such feature.

Here is SS Power Disc Lock freeware tool which provides number of useful features likeAnti Copying Data From Disc., burn CD-DVD, ISO on fly with Lock, Anti Extracting Data From Disc and ISO File. Check below complete features list.

Features of SS Power Disc Lock

1. Burn Data on Disc With Lock on the Fly.

2. Ability to Make and Burn Normal and Protected Standard ISO File (*.iso ) .

3. Ability to Detect Illegal Copy (Anti Alcohol 120% , Clonecd ) .

4. Anti Extracting Data From Disc and ISO File (Anti IsoBuster ) .

6. Anti Copying Data From Disc.

7. Ability to Hide Data From Operating System .

8. Ability to Resizing Each File and Each Folder up to 4GB Without Destroy Extra Space on Disc .

9. No Need of Extra Data Like Bad Sectors, Weak Sectors….

10. No Need of Special Disc or Device.